正品美国丹尼斯科PT4626-35Mpa-6/18高温熔体压力传感器

   丹尼斯科PT4626-35Mpa-6/18高温熔体压力传感器高温熔体压力传感器 Features
TPT4634-35MPA-6/18-TC6?
TEMPERATURE & MECHANICAL CHARACTERISTICS
Max Diaphragm Temperature: 750oF (400oC)
Zero Shift (due to temperature change):
15 psi/100oF Typical (27 psi/100oC)
Electronics Operating Temperature: 250oF (121oC)
Zero Shift Due to Temperature Change:
+/- 0.01% FS/oF max (+/- 0.02% FS/oC max)
Sensitivity Shift Due to Temperature Change:
+/- 0.005% FS/oF max (+/- 0.01% FS/oC max)
丹尼斯科PT4626-35Mpa-6/18高温熔体压力传感器Mounting Torque: 500 inch/lbs. maximum
Standard Wetted Parts: Dymax?coated 15-5 PH SST
PERFORMANCE CHARACTERISTICS
Output: 3.33 mV/V +/- 2.0%
Input Voltage: 10 Vdc recommended, 12 Vdc maximum
Combined Error: +/- 0.25% FSO,
(Including Linearity, Repeatability & Hysteresis)
+/- 0.5% FSO for 500, 750, 1,000 psi ranges
Repeatability: +/- 0.1%FSO,
+/- 0.2% FSO for 500, 750, 1,000 psi ranges
Configuration: Four-arm bonded foil Wheatstone bridge
strain gage
Bridge Resistance: Input: 345 Ohms minimum
Output: 350 Ohms +/- 10%
Over Pressure: 2 X FSO or 35,000 psi whichever is less
Zero Balance: +/- 5% FSO
Internal Shunt Calibration (R-Cal): 80% FSO +/- 0.5%
Insulation Resistance: 1000 megohms @ 50 Vdc
? Reliable, repeatable pressure measurements
? Superior abrasion resistance
? Good stability and repeatability
? Ideal for high temperature applications
? Wide variety of pressure ranges
? Easy to calibrate with local indicator
? Accuracy better than +/- 0.25%
? Dymax?coated stainless steel wetted parts
? Proven sensor design
? Excellent thermal stability and repeatability
? 0 - 500 to 0 -30,000 psi
? Internal 80% shunt calibration
The 丹尼斯科PT4626-35Mpa-6/18高温熔体压力传感器 Series transducer is a +/- 0.25% sensor ideal for melt pressure applications requiring high
accuracy, simple installation, repeatability and reliability. The PT420A transducers provide the industry
standard 3.33 mV/V ** designed to work with most pressure indicators. The PT420A comes equipped
with an eight pin Bendix connector. Optional thermocouple or RTD configurations are available to provide
丹尼斯科PT4626-35Mpa-6/18高温熔体压力传感器melt temperature. The PT420A features a 1/2-20 UNF thread for installation in standard transduc